| ITEM MODEL |
CNC Power Turn |
| CPT-32 |
CPT-36 |
| Capacity |
Swing over bed |
840mm(33") |
940mm(37") |
| Swing over cross slide |
450mm(17.7") |
550mm(21.6") |
| Swing over gap |
1100mm(44") |
1200mm(48") |
| Width of gap |
*400mm(16") |
| Distance between center |
|
1000mm
(40") |
2000mm
(80") |
3000mm
(120") |
4000mm
(160") |
5000mm
(200") | |
| Headstock |
Spindle nose |
ASA-A2-11 /*A2-15 |
| Spindle bore |
|
140mm
(5.5") |
/ *230mm
(9") |
255mm
(10") | |
| Range of spindle speed |
1-1000 RPM |
| No. of spindle speed |
4/ *2 |
| Carriage |
Cross slide travel(X-axis) |
480mm(19") |
| Longitudinal travel(Z-axis) |
|
1300mm
(50") |
2300mm
(90") |
3300mm
(130") |
4300mm
(170") |
5300mm
(210") | |
| AC servo motor |
X : 2.1kw(2.8HP) Z : 3.3kw(4.5HP) |
| Rapid feed |
X : 10m/min(393ipm) Z : 8m/min (315ipm) |
| Cutting feed rate |
X/Z : 0.001-500mm/rev(0.0004"-20"/rev) |
| Turret |
Tool station(Random)available |
H4/ *H6, V8 |
| Size of external turning |
32x32mm (1-1/4" x 1-1/4") |
| Boring bar dia. |
 50mm(2") |
| Tailstock |
Quill dia |
125mm(5") |
| Quoll strock |
250mm(10") |
| Taper of center |
MT NO.6 |
| Motor |
Main spindle (continuous) |
AC 15 KW(20HP) |
| Main spindle (30 min. rating) |
AC 18 KW(25HP) |
| Hydraulic pump |
1.5kw(2HP) |
| Coolant pump |
0.375kw(0.5HP) |
| Bed |
Width of bed |
510mm(20") |
| Control |
CNC control unit available |
FANUC, FAGOR, MELDAS, SIEMENS |
| Controlled axis |
2 |
