|
AX 450
The major structure parts are manufactured from high quality Meehanite cast iron, tempered for stress relief. The spindle head elevation employs a pneumatic type balance system to minimize the spindle head vibration during moving.
The 5-axis synchronized machining saves machining time, reduces repetitive workpiece setup and error, while dramatically increasing machining and accuracy.
Pinnacle AX320/ AX450 are proven to be super machines for high efficiency and accuracy. |

|
- 760 x 610 x560 mm Travel
- A Axis Tilt 220° (±110°)
- C Axis Rotary 360°
- Rapid Feedrate 30/30/24
- 9/12 Kw Spindle Motor
- ISO40 Spindle Taper
- X, Y & Z Axis Linear Way
|
|

|
Rigid, Stable, Accurate |
Ruggedly Constructed Throughout to Provtde Lifetime Accuracy Year After Year |
- The major structural parts are manufactured form high quality Meehanite cast iron (GB 300), tempered for stress relief with hardness over 190HB.
- Roller type linear ways on X, Y, Z axis increased stability.
- X, Y, Z axis are transmitted with class C3, Ø40mm ball screws.
|
|
COOLANT THROUGH BALL SCREW (STANDARD) |
- Coolant through ball screws on X, Y axis minimizes thermal deformation and backlash, while ensuring smooth motion during rapid traverse.
|
PNEUMATIC BALANCE SYSTEM |
- The Z-axis movement is pneumatic balance system through a pneumatic counter-balance system. An accumulator is equipped in the air circuit, ensuring fast and stable Z-axis movement and giving high quality finish.
|
COOLING SYSTEM TO SPINDLE |
- The spindle oil cooler permits the spindle to keep a constant temperature running and ensures long service life. It also provides high efficiency machining and high accuracy.
|
Each Pinnacle machine is subject to dynamic and static accuracy tests.
Pinnacle Machine accuracy meets ISO 10791 VDI 3441, ISO 230, JIS B6388 and ASMEB5 standards. |
Accuracy |
|
ISO 10791-4 |
 |
|
Axis Travel |
Axis Travel |
|
>500mm<800M |
>800mm<1250M |
|
Bi-directional Positioning |
A: |
0.025 |
0.032 |
0.003mm |
Bi-directional Repeatability |
R: |
0.015 |
0.018 |
0.003mm |
JIS B6336-4 shows the same value as ISO Standard;
P value of VDI / DGQ3441 is equivalent to A of ISO10791-4, and PS is equivalent to R
All values shown above are measured for machine in good air conditoned environments. |

|
- Rotary Table diameter Ø320 / Ø450mm
- Table rotation and tilting are driven by servo motor
- Rotation, indexing accuracy 15 are sec.
- Tilting indexing accuracy 60 arc sec.
|
|
|
WORKING CAPACITY AX320 |

|
QUALITY & EFFICIENCY |
Perfect Accessories for Outstanding Performance |

LASER INSPECTION |

RIGHT ANGLE TEST ON X AND Y AXES |

NOISE INSPECTION |
|
|
|

ARM TYPE ATC |

COUPLINGS |

COOLANT THROUGH SPINDLE |
|
|
|

CHOICE OF HEIDENHAIN AND SIEMENS CNC CONTROL |

20 BAR HI-PRESSURE PUMP AND TANK |

20 BAR HI-PRESSURE PUMP + TANK W/PAPER FILTER |
|
|
|

NOISE INSPECTION |

CHIPS FLUSHING NOZZLES |
|
|
SCREW |
CHAIN |
SCRAPING |
Steel |
O |
X |
O |
Casting Iron |
X |
O |
X |
Aluminum |
X |
X |
O |
Copper |
X |
X |
O |
Mixture |
X |
O |
X |
Not Iron Material |
X |
O |
X |

BALL BAR DIAGNOSTICS
|
|
AUTOMATIC LUBRICATION SYSTEM |
- The Lubrication System automatically measures and accurately distributes the oil to the slide ways, ballscrews and bearings.
|
SPLASH GUARD |
- The full-enclosed splash guard meets environmental protection and CE requirements. It offers users a comfortable working environment.
|
|
MODEL |
AX450 |
TABLE |
|
Table Size (mm) |
Ø450 |
Travel Ranges (X x Y x Z mm) |
760 x 610 x 560 |
T Slot Size (Size x deg ) |
14 x 45 |
Max. Table Load (kg) |
150 |
Max. Workpiece Size (W x H mm) |
Ø450x Ø300 |
Diameter of Table Hole (mm) |
Ø171 |
Spindle Nose to Table Surface (mm) |
55~615 |
A Axis, Tilt (deg)/(0.001°) |
220°(±110°) |
C Axis, Rotary (deg)/(0.001°) |
360° |
SPINDLE |
|
Tool Shank & Pull Stud |
ISO40 |
Spindle Inner Diameter (mm) |
Ø70 |
Spindle Speed (rpm) Direct drive |
10000 |
Spindle Speed (rpm) Built-in |
15000 |
Main Motor (con/30 min Kw) |
9/12 |
AXIS SERVO MOTOR |
|
Rapid Feed Rate (X/Y/Z m/min) |
30/30/24 |
Feed Rate (X/Y/Z/ m/min) |
10 |
Feed Rate (A/C rev/min) |
5.5/11.5 |
X Axis Rated Torque (Nm) |
10 |
Y Axis Rated Torque (Nm) |
10 |
Z Axis Rated Torque (Nm) |
10 |
A Axis Rated Torque (Nm) |
10 |
C Axis Rated Torque (Nm) |
10 |
AUTO TOOL CHANGER |
|
ATC Type |
DISK (CHAIN) |
Cam Type |
ARM |
Tool Selection (Bi-direction) |
RANDOM |
Tool Storage Capacity (PCs) |
24 (32,40) |
Max. Tool Diameter (mm) |
Ø90 (Ø76) |
Max. Tool Length |
300 |
Max. Tool Weight |
8 |
MISCELLANEOUS |
|
Air Requirement (Kg/cm2) |
6 |
Hydraulic Requirement (Kg/cm2, L) |
40, 30L |
Voltage |
220 |
Power Requirement (KVA) |
40 |
Coolant Tank Capacity (L) |
300 |
Machine Weight (KGs) |
7000 |
Machine Height (mm) |
2900 |
Floor Space (L x W mm) |
3100 x 2230 |
Packing Size (L x W x H mm) |
3100 x 2230 x 2560 |
All Specifications And Designs Are Subject To Change Without Notice. |
Standard Accessories |
|
- Air blast through spindle
- Air blast for workpiece (nose)
- Coolant flushing system
- 3 axes telescopic covers
- Full splash guard
- Automatic lubrication system
- Working lamp
- Operation status light
- Arm type 24-tool ATC
- Z axis pneumatic balance system
- Cooling System
|
- Air gun / water gun
- MPG handwheel
- Heat exchanger
- RS-232 Interface
- Rigid tapping
- Spindle oil cooler
- Adjusting Tools and box
- Leveling bolts and pads
- Operation and programming manual
- Hollow ball screws with cooling system
|
|
|
Options |
- Transformer
- Chain type chip conveyor
- Coolant through Spindle
- Linear Scales
- Auto tool length measurement
- Auto workpiece measurement
|
|
|
MACHINING CENTER
|