ReadyPlanet.com
dot
dot
เครื่องฉีดพลาสติก
dot
bulletเครื่องฉีดพลาสติก SHINE WELL
bulletเครื่องฉีดพลาสติก CREATOR
dot
เครื่องเจียรราบ
dot
bulletเครื่องเจียรราบ PROTH
dot
เครื่องกลึง LATHE
dot
bulletเครื่องกลึง Kpan
bulletเครื่องกลึง winho
bulletเครื่องกลึง SUN FIRM
dot
Machining center
dot
bulletTailift
bulletPINNACLE
bulletACCUWAY
dot
5 AXIS MACHINING CENTER WITH ROTARY TABLE
dot
bulletACCUWAY
dot
Cnc Lathe
dot
bulletACCUWAY
bulletเครื่องกลึงซีเอ็นซี JENN WEI
bulletเครื่องกลึงซีเอ็นซี SUN FIRM
bulletSUN FIRM Cnc lathe
dot
TURNING CENTER CNC LATHE 2SPINDLE WITH REVOLVING TOOLS
dot
bulletACCUWAY
dot
VERTICAL CNC LATHE
dot
bulletACCUWAY
dot
Milling
dot
bulletเครื่องมิลลิ่ง PINNACLE
bulletPINNACLE
dot
Radial Drill
dot
bulletK-pan
dot
BROACHING MACHINE
dot
bulletBROACHING MACHINE
bulletรูปเครื่อง Broaching
bulletBROACHING CUTTER
bulletตัวอย่าชิ้นงาน Broaching
dot
EDM MACHINE
dot
bulletEDM CNC CREATOR
dot
ระบบขจัด ฝุ่น ควัน ไอน้ำมัน
dot
bulletFiltermist
dot
หัวข้อพิเศษ
dot
bulletรับสมัครงาน
bulletอาคารสำนักงาน ขาย-ให้เช่า




BX 300A / BX 500A

5-AXIS MACHINING CENTER
BX series machines by Pinnacle offer the latest and most precise 5-axis technology in the market. Simplify setup and production of complex and multi-sided parts without sacrificing precision and accuracy and saving time. Optimized 5-axis concepts meet every requirement and prevail in all industries worldwide BX series designed by Pinnacle that are High rigidity structure to provide widest working range. Hi quality Meehanite casting iron, tempered for stress relief and over HB190 hardness to ensure deformation-free performance year and year.

  • Real powerful 5-axis machining center
  • Fast and contour-accurate motion guide
  • High-quality surface
  • The shortest machining time
 
BX300A / BX500A
BX300 and BX500, a 5-axis control vertical machining center with a swivel head and rotary table design. Rotary table is removable and machine could work as 4 axes machine.
 

B-AXIS-SWIVEL MILLING HEAD
  • Built-in 15,000rpm Spindle with ± 120° swing.
  • B axis-swivel head designed by dual pitch worm gear set that are teeth backlash elimination and transmission perfectly.
 
Movable tool magazine system designed by linear guideway and hydraulic system to move ATC backward over after tools changed. B axis would rotate up to 120° without any interference.
 
SPINDLE TORQUE OUTPUT DIAGRAM
 
PNEUMATIC BALANCE SYSTEM
Head Balancing system is through a close-loop pneumatic cylinder system. An accumulator is equipped in the air circuit to ensure fast and stable Z axis movement and give hi quality finish.
 
COOLANT THROUGH BALL SCREWS
Coolant through ball screws an X, Y axis minimizes thermal deformation and backlash, while ensuring smooth motion during raped traverse.
 
CNC CONTROLLER SYSTEM
BX series combine Heidenhain iTNC530 smart controller system that is a user-friendly, reliable and Hi-Tech controller includes DCM (Dynamic Collision Monitoring), TCPM (Tool Center Point Management) and Title & Plane function.
 
PLANE Function
The PLANE feature makes it easy to define a tilted working plane so that making everything much.
 
Tilting the Working Plane
Use tilting the working plane. With Cycle 19 with swivel heads or tilting tables. You program the operation as usual in the working plane, for example in X/Y. The machine runs the program in a plane that has been tilted by one or more rotary axes with respect to the main plane.
 
DCM (Dynamic Collision Monitoring)
DCM enables you to check for collision in the test run mode before acutally machining a part. To avoiding machine dowtimes. Simulation for a safety process.
 
TCPM function (Tool Center Point Management)
In five-axis operations, TCPM function to move the tool reliably on the contour and ensure that the work surface is not damaged. Maintain the position of the tool tip when positioning with tilted axes.
With the aid of the TCPM function, the iTNC 530 automatically corrects the tool path for the machine geometry and the tool length as well as compensates the tool radiusin three dimensions.
 
Kinematice Opt. (Option)
KinematiceOpt. is an important component to help you meet these high requirements: With a HEIDENHAIN touch probe inserted, a 3-D touch probe cycle measures your machine's rotary axes fully automatically. The results of measurement are the same, regardless of whether the axis is a rotary table, a tilting table or a swivel head.
 
 
 
Specifications
 
MODEL BX300A BX500A
TABLE    
Table Size (mm) 1300 x 610 1450 x 610
Travel Ranges (X x Y x Z mm) 1140 / 610 / 810 1300 / 610 / 810
Max. Table Load (kg) 850 850
Spindle Nose to Table Surface (mm) 110~920 110~920
T-slot (W x D x N mm) 18 x 125 x 5 18 x 125 x 5
BUILT-IN SPINDLE    
Spindle Taper BT40 BT40
Bearing Inner Diameter (mm) Ø70 Ø70
Spindle Center to Column (mm) 600 675
Spindle Speed (rpm) 15000 15000
Draw Bar Force (kgf) 800 ± 100 800 ± 100
Main Motor (con/30min kw) 15 / 18 15 / 18
Motor Torque (con/max Nm) 48 / 120 48 / 120
SWING HEAD    
Driver Type WORM GEAR WORM GEAR
Reduction Ratio 1 : 72 1 : 72
Tilting Range (deg) ± 120° ± 120°
Max. Speed (rpm) 16.6 16.6
Min. Unit 0.001 0.001
Clamp Torque (Nm) 1157 1157
Working Torge (Nm) 764 764
ROTARY TABLE    
Type SEPARATED SEPARATED
Table Diameter (mm) Ø320 Ø500
Center Bore Diameter (mm) Ø70 Ø60
Rotation Speed (rpm) 22.2 11.1
Min. Index 0.001 0.001
Max. Table Load (kg) 350 500
AXIS SERVOMOTORS    
Rapid Feed Rate (X/Y/Z m/min) 30 / 30 / 24 30 / 30 / 24
Feed Rate (X/Y/Z m/min) 10000 10000
Rated Torque (X/Y/Z m/Nm) 11 / 11 / 11 11 / 11 / 11
B-Axis Rated Torque (Nm) 11 11
C-Axis Rated Torque (Nm) 11 11
TOOL MAGAZINE    
ATC Type PLATE PLATE
CAM Type DAUL ARM DAUL ARM
Tool Selection (Bi-direction) RANDOM RANDOM
Tool Storage Capacity (pcs) 24 (32 / 40) 24 (32 / 40)
Max. Tool Diameter (mm) Ø90 (Ø75) Ø90 (Ø75)
Max. Tool Length 250 250
Max. Tool Weight 8 8
ACCURACY    
Positioning XYZ linear axis (mm) 0.005 0.005
BC rotary (sec) 10" 10"
Repeatability XYZ linear axis (mm) 0.003 0.003
BC rotary (sec) 6" 6"
MISCELLANEOUS    
Air Requirement (kg/cm²) 6 6
Voltage 380 380
Power Requirement (KVA) 20 20
Coolant Tank Capacity (L) 300 300
Machine Weight (kgs) 5300 6500
Machine Height (mm) 2750 3100
Floor Space (L x W mm) 3100 x 2230 3400 x 2230
Packing Size (L x W x H mm) 3150 x 2300 x 2550 3450 x 2300 x 2550
All Specifications And Designs Are Subject To Change Without Notice.
 
Standard accessories
 
Standard Accessories  
  • Air blast through spindle
  • Air blast for workpiece
  • Coolant system
  • 3 axes telescopic covers
  • Full splash guard
  • Automatic lubrication system
  • Working lamp
  • Operation status light
  • Rigid tapping
  • Arm type 24-tool ATC
  • Z axis pneumatic balance system
  • Air gun / water gun
  • MPG handwheel
  • Spindle oil cooler
  • Encoder for B axis and C axis
  • Hollow ball screws with cooling system
  • RS-232 interface




MACHINING CENTER

SV 96/116/126
SV
DV 2
DV 1
LH 500 B
LH 500 A
BX 700
AX 450
AX 320
PINNACLE INDEX
SV 65/85/105
QV 159/179/209
QV 117/127/147
LV 85 APC
LV 96/116/126
LV 65/85/105
11Hi / 8 Hi article
LV 300/500



Copyright © 2010 All Rights Reserved.
บ ปั้นวัฒนา จำกัด ผู้แทนจำหน่ายเครื่องจักรกลโรงงาน สำหรับการผลิต ต่างๆ คุณภาพมาตรฐาน พร้อมบริการหลังขาย เครืองฉีดพลาสติก เครื่องกลึง เครื่องมิลลิ่ง เครื่องกลึงcnc แมชชีนนิ่งเซ็นเตอร์ เครื่องไส เครื่องเจียรราบ-กลม เครื่องคว้านลูกสูบ เจียรข้อเหวียง โทร 02 4350051