| Specifications |
| Model |
M660 Series |
| M2640 |
M2660 |
| Swing Over Bed |
660 mm
|
| Swing Over Cross Slide |
438 mm
|
| Distance Between Centers |
1000 mm |
1500 mm |
| Swing Over Gap |
892 mm
|
| Width Of Bed |
350 mm
|
| Spindle Nose |
ASA D1 - 8
|
| Spindle Bore |
82 mm
|
| Taper of Spindle Bore |
MT 7 |
| Range of Spindle Speed |
15 ~ 1500 R.P.M. ( 12 steps ) |
| Inch Threads Range |
2 ~ 56 T.P.I. |
| Metric Threads Range |
P 0.5 ~ P 14 |
| Longitudinal Feeds Range |
0.05 ~ 0.8 mm |
| Cross Feeds Range |
0.02 ~ 0.40 mm |
| Leadscrew Diameter |
38 mm |
| Leadscrew Pitch |
4 T.P.I. or 6 mm |
| Taper of Tail Center |
MT 5 |
| Tail Spindle Travel |
165 mm |
| Tail Spindle Diameter |
75 mm |
| Main Drive Motor |
7.5 HP ( 5.625 KW ) |
| Coolant Pump |
1/8 HP ( 0.1 KW ) |
| Max. March of Compound Rest |
200 mm |
| Max. March of Cross Slide |
300 mm |
| Machine Dimensions (cm) |
229 x 99 x 130 |
279 x 99 x 130 |
| Packing Dimension (cm) |
238 x 115 x 170 |
290 x 115 x 170 |
| Net Weight |
2250 kg |
2450 kg |
| Gross Weight |
2400 kg |
2600 kg |
|
※ All specifications above are subject to change without notice.
|
| Standard Accessories |
Optional Accessories |
| ■ Tool Box |
1pc |
■ 3-jaw scroll chuck |
■ Chuck guard |
| ■ Centers |
2pcs |
■ 4-jaw independent chuck |
■ American tool post |
| ■ Safety pin |
1set |
■ Face plate |
■ Change gears for D.P and module thread |
| ■ Screw wrench for cutter setting |
1pc |
■ Follow rest |
■ 5c lever collect closer |
| ■ Back plate |
1pc |
■ Steady rest |
■ Driving plate |
| ■ Coolant system |
1set |
■ 4-position carriage stop |
■ Quick change tool post |
| ■ 4-way tool post |
1set |
■ Micro carriage stop |
■ Digital readouts |
| ■ Auto-feed stopper ring |
1set |
■ Live centers |
■ Hydraulic copying machine |
| ■ Rear cutter rest |
■ Chip guard |
| ■ Taper turning attachment |
■ Work light |
| ■ Rear splash guard |
|
|
|
