| Item \ Model |
CNC Heavy Turn |
|
CHT-56 |
CHT-60 |
CHT-64 |
| Capacity |
Swing over bed |
1420mm(56") |
1520mm(60") |
1620mm(64") |
| Swing over cross slide |
1000mm(40") |
1100mm(44") |
1200mm(48") |
| Swing over gap |
1700mm(68") |
1800mm(72") |
1900mm(76") |
| Width of gap |
*610mm(24") |
| Distance between center |
|
1000mm
(40") |
2000mm
(80") |
3000mm
(120") |
4000mm
(160") |
5000mm
(200") | |
| Headstock |
Spindle nose |
ASA-A2-15 / *A2-20,28,special |
| Spindle bore |
|
153mm
(6") |
/ *230mm
(9") |
310mm
(12") |
405mm
(16") |
530mm
(21") | |
| Range of spindle speed |
1-500RPM |
| No. of spindle speed |
4/ *2 |
| Carriage |
Cross slide travel(X-axis) |
900mm(35") |
| Longitudinal travel(Z-axis) |
|
| AC servo motor |
X:3kw(4HP) Z:4.5kw(6HP) |
| Rapid feed |
X:6m /min (236ipm) Z:6m/min(236ipm) |
| Cutting feed rate |
X/Z:0.001-500mm/rev (0.0004"-20"/rev) |
| Turret |
Tool station(Random)available |
H4/ *H6, V8, V12 |
| Size of external turning |
32x32mm (1-1/4" x 1-1/4") |
| Boring bar dia. |
 60mm(2.4") |
| Tailstock |
Quill dia |
200mm(7.9") |
| Quill stroke |
200mm (10") |
| Taper of center |
MT NO.6 |
| Motor |
Main spindle (continuous) |
AC 22 KW (30HP) |
| Main spindle (30 min. rating) |
AC 26 KW (35 HP) |
| Hydraulic pump |
2.3kw(3HP) |
| Coolant pump |
0.75kw(1HP) |
| Bed |
Width of bed |
850mm(33") |
| Control |
CNC control unit available |
FANUC, FAGOR, MELDAS, SIEMENS |
| Controlled axis |
2 |
