Liner Way Series
When jobs call for highly efficient machining and when outstanding accuracy is critical, a Pinnacle linear way series vertical machining center is the perfect solution. The LV300B(D) / LV500B(D) is a multifaceted series. It is not only ideal for smaller factories and machine shops. It covers applications ranging from watch and time pieces to 3C and 4C industries. It is also ideal for manufacturing molds for joints, teeth and bones used in the medical industry. If you are serious about increasing machine productivity and profits, the Pinnacle linear way series can really help you.
	LV500 500 x 350 x 400 mm Travel Rapid Feedrate 32/32/32 m/min 5.5KW Spindle Motor X, Y & Z Axis Linear Way 12,000 rpm Direct-Drive spindle ( ISO40)
	LV300B(D), LV500B(D) 305 /510 x 305 x 305 mm Travel Rapid Feedrate 32/32/32 m/min 3.7 / 5.5KW Spindle Motor X, Y & Z Axis Linear Way 24,000 rpm Built-in spindle (ISO30) 12,000 rpm Direct-Drive spindle (ISO30 / ISO40)

The Best Possible Structural Design

Rugged Construction Assures Optimum Rigidity and Stability.

The major structural parts are manufactured from high quality Meehanite cast iron (FC-30), hardened to over HB190 and tempered to relieve stress. High precision and premium quality P class linear quidways way wide block and 20mm width linear quideways on three axes. Screw type chip conveyor at front side to remove chips efficiently. The three axes equipped with class C3 precision and 25mm diameter ball screws. Oversized high performance AC digital servo motors provide up to 32M per minute rapid traverse assuring smooth consistent power to give a perfect finish.

Rigid, Precision Spindle Assures High Quality Machining Supported by superior precision P4 class bearings, the spindle provides an extra wide range of machining capacity and high speed. Floating unclamping system assures tool unclamping force will not transmit to the spindle bearings. It provides stable tool clamping and unclamping with the spindle and extends the spindle bearings' life. The spindle is a cartridge-type. Choice of various spindle speeds - Direct-drive 12,000 rpm. Building-in 24,000 rpm. The circulating oil cooling system on the spindle head prevents thermal expansion and offers the best precision machining environment.

Arm Type ATC The 20-tool arm type magazine is activated by electric motor transmitted by U-cam mechanism, featured with the fastest tool change speed and it bi siewxrionL Ensom tool selection. (option for LV300 / LV500)

Chips Flushing Nozzles Coolant flushing nozzles on rear inner wall of guard prevent jam of chips during operation.

Water Curtain on Spindle The spindle can be mounted with water curtain device. In conjunction with graphite filtration device (separator and filter bag), the machine is ideal for graphite machining. It prevents graphite dust from splashing to the working environment which may causes damage to the operators health and circuit board in the control box.

Automatic Lubrication System The Lubrication System automatically measures and accurately distributes the oil to the slide ways, ballscrews and bearings.

Splash Guard The full-enclosed splash guard meets environmental protection and CE requirements. It offers users a comfortable working environment.

Control System The centralized control panel employs a touch sensing screen for user-friendly operation. The humanized designed control panel has an elegant appearance. Various controllers can be chose - Mitsubishi, Heidenhain, Fanuc and Siemens.

Accuracy   ISO 10791-4     Axis Travel Axis Travel   Tolerances   >500mm<800M >800mm<1250M   Bi-directional Positioning A: 0.025 0.032 0.005mm Bi-directional Repeatability R: 0.015 0.018 0.005mm JIS B6336-4 shows the same value as ISO Standard; P value of VDI / DGQ3441 is equivalent to A of ISO10791-4, and PS is equivalent to R All values shown above are measured for machine in good air conditoned environments.

	Specifications

MODEL	LV300B	LV300D	LV500B	LV500D	LV500
TABLE
Table Size (mm)	406 x 305		610 x 305		570 x 350
Travel Ranges (X x Y x Z mm)	305 x 305 x 305		510 x 305 x 305		500 x 350 x 400
Max. Table Load (kgs)	150		200		200
Spindle Nose to Table Surface (mm)	190 ~ 495				30 ~ 430
T-slot (Width x Distance x Number mm)	14 x 100 x 3
SPINDLE	BUILT-IN	DIRECT-DRIVE	BUILT-IN	DIRECT-DRIVE	DIRECT-DRIVE
Tool Shank & Pull Stud	BT30		BT30		BT40/DIN40
Spindle Inner Diameter (mm)	Ø45	Ø50	Ø45	Ø50	Ø120
Spindle Center to Column (mm)	362				350
Spindle Speed (rpm)	24000	10000	24000	10000	10000
Draw Bar Force (kgf)	350				800
Main Motor (con/30 min Kw)	3.7	5.5	3.7	5.5	5.5
FEED RATE
Rapid Feed Rate (X/Y/Z m/min)	32 / 32 / 32
Feed Rate (X/Y/Z/ mm/min)	10,000
AXIS SERVOMOTOR
Mitsubishi X/Y/Z (Kw)	HF 104 (1.0)				HF 154T (1.5)
Fanuc (Kw)	β8i/3000 is (1.8)
Fagor (Kw)	FXM14.20 (1.86)
Heidenhain (Kw)	QSY96 (1.4)
AUTO TOOL CHANGER
Mag Type	DISK / PLATE
Cam Type	GENOVA / DAUL ARM
Tool Selection (Bi-direction)	ABSOLUTE / RANDOM
Tool Storage Capacity (PCs)	12 / 20				10 / 20
Max. Tool Diameter (mm)	Ø82 / Ø65				Ø115 / Ø65
Max. Tool Length (mm), Weight (kgs)	150mm, 3kgs				150mm, 7kgs
MISCELLANEOUS
Air Requirement (Kg/cm2)	6
Voltage	220V, 3Ph, 50 / 60Hz
Power Requirement (KVA)	10
Coolant Tank Capacity (L)	100				170
Machine Weight (Kgs)	1800		2000		2600
Floor Space (L x W mm)	1500 x 1900 x 2100		1700 x 1900 x 2100		1950 x 2130 x 2155

All Specifications And Designs Are Subject To Change Without Notice.

	Accessories

Accessories   Air blast through spindle Air blast for workpiece (nose) Coolant flushing system 3 axes telescopic covers Full splash guard Centralized automatic lubrication system Working lamp Operation status light Cooling system Air gun and water spray-gun MPG handwheel Heat exchanger RS-232 Interface Spindle oil cooler Adjusting tools and box Leveling bolts and pads Operation and programming manual

Control System MITSUBISHI 64SM / 65SM / 70 / 720 / 730 FAGOR 8055i Plus HEIDENHAIN iTNC530 SMART FANUC 0i -MC / 18i -MB

	Quality Inspections

Quality Through Precision Inspections

Each Pinnacle machine is subject to dynamic and static accuracy tests. Pinnacle machine accuracy meets VDI 3441, ISO 10791, JIS B6336 and ASMEB5 standards.

Laser Inspection

Ball Bar Inspection

Right Angle Test On X And Y Axes

Dynamic Vibration

Noise Inspection

Three-dimensional coordinate measurement